Hay KITKAT; I have posted this a couple of times, and it might actually work for you, especially if you know where she has to come out, and you can bait the trap. Good luck.
Create a reptile tube trap, based on a technique suggested by HSUS animal capture consultant, Dave Pauli. Inside this trap, the temperature should be just right for the snake—more appealing than the surrounding area. The trap is a piece of thin-walled PVC tubing that's 2–3 ft. long. Drill a few 1/8" air holes along the length of the tube. Cap one end. In cold weather, place a disposable hand warmer, battery-operated electric sock, or heating pad in the far end of the tube, along with some soft cotton rags. If you have fresh rodent droppings, you may want to toss a few in there, too. (In hot weather, substitute an ice pack or cold, wet rag for the heat source.) Then drill a 1" hole into a cap and use it to cover the other end of the tube. Although the snakes can leave the trap, they usually stay inside because it's more comfortable for them. You can install a one- way valve by affixing a 1 1/2" stiff plastic circle over the inside of the cap. The snake can push its way in, but can't leave easily. (This trap also works with other reptiles, such as lizards.)