Results 1 to 10 of 29

Hybrid View

  1. #1
    Forum Moderator infernalis's Avatar
    Join Date
    Feb 2008
    Location
    Upstate NY
    Posts
    7,920
    Country: United States

    Re: Cutting Energy Corners...

    Quote Originally Posted by Zephyr View Post
    Okay, I've figured that it would cost less to heat my room via one of those mini heaters. Get it to 82 F, and leave it there with fluorescent lights on the garters. Are there any downfalls to the mini heaters?
    Like gases emitted or anything?
    Here is what I use Kyle. It does a fine job, is inexpensive to operate and gives off NO fumes. (Does not dry the air like a heater with a fan does either)


  2. #2
    Reptile Lady reptile3's Avatar
    Join Date
    Aug 2008
    Location
    Northern Georgia
    Posts
    1,432
    Country: United States

    Re: Cutting Energy Corners...

    we have one of those, I think it's in our attic... I have a small heater on my bench in the basement, so I keep warm when working on cables. Soon the basement is going to have heat down there! I can't wait~
    Stephanie




  3. #3
    Forum Moderator infernalis's Avatar
    Join Date
    Feb 2008
    Location
    Upstate NY
    Posts
    7,920
    Country: United States

    Re: Cutting Energy Corners...

    Quote Originally Posted by reptile3 View Post
    we have one of those, I think it's in our attic...
    Wow you must have a warm attic

    Personally, I don't heat my attic.

  4. #4
    Reptile Lady reptile3's Avatar
    Join Date
    Aug 2008
    Location
    Northern Georgia
    Posts
    1,432
    Country: United States

    Re: Cutting Energy Corners...

    Quote Originally Posted by dekaybrown View Post
    Wow you must have a warm attic

    Personally, I don't heat my attic.
    in the attic in a box!! LOL

    or we may have left it. not sure.
    Stephanie




  5. #5
    Forum Moderator infernalis's Avatar
    Join Date
    Feb 2008
    Location
    Upstate NY
    Posts
    7,920
    Country: United States

    Re: Cutting Energy Corners...

    Quote Originally Posted by reptile3 View Post
    in the attic in a box!! LOL

    It must be REALLY warm inside that box

  6. #6
    Edgy Exotic Reptiles EdgyExoticReptiles's Avatar
    Join Date
    Aug 2007
    Location
    Bay Area
    Posts
    1,483
    Country: United States

    Re: Cutting Energy Corners...

    I also have an oil heater and they are very inexpensive and heat the room easily
    Email:reed@edgyexoticreptiles.com
    http://www.edgyexoticreptiles.com



  7. #7
    "Preparing For Second shed" NetBSD's Avatar
    Join Date
    Oct 2008
    Location
    Mount Carmel, PA
    Posts
    208
    Country: United States

    Re: Cutting Energy Corners...

    do as i do, i got 7 servers in my room (computers) and it keeps the room 80-85F with a exhaust fan in the window 24/7. right now i have it at a nuice 79.2F with the door cracked a bit letting the colder air in from the hallway

  8. #8
    Ophiuchus rhea drache's Avatar
    Join Date
    Feb 2007
    Location
    Eastern US
    Posts
    8,129
    Country: Germany

    Re: Cutting Energy Corners...

    Quote Originally Posted by dekaybrown View Post
    Here is what I use Kyle. It does a fine job, is inexpensive to operate and gives off NO fumes. (Does not dry the air like a heater with a fan does either)

    that's what I use too and we've had ours for at least five years
    we had another little electric one with a fan and it became unreliable after two years
    rhea
    "you cannot depend on your eyes when your imagination is out of focus" Mark Twain


  9. #9
    "Preparing For Second shed" NetBSD's Avatar
    Join Date
    Oct 2008
    Location
    Mount Carmel, PA
    Posts
    208
    Country: United States

    Re: Cutting Energy Corners...

    Quote Originally Posted by drache View Post
    that's what I use too and we've had ours for at least five years
    we had another little electric one with a fan and it became unreliable after two years


    yeah the ones with the fans always quit on me, i used the above oil heaters in my old house and they worked great. the oil inside really helps keep down the cost cause it holds the heat for a long time

  10. #10
    "PM Boots For Custom Title" Loren's Avatar
    Join Date
    Nov 2007
    Location
    U.S.
    Posts
    1,224
    Country: United States

    Re: Cutting Energy Corners...

    Quote Originally Posted by dekaybrown View Post


    yep, I use one of these too. Mine is on a timer just for night time(make sure its rated high enough for the heater) when the temps are mildly cool and on full time when its real cold, and off the rest of the year.
    I use a digital thermoter with a min/max memory, which takes readings at eye level and also from a probe near the floor, so I can check and adjust temp and duration as needed. In the winter, I shoot for no cooler than 72 night and no warmer than 85 day, personally, with an average of 80-82 being great.
    I also have a 20 inch fan on low full time, pointing downward across the room from near the ceiling, and 2 small fans on the floor pointing in random directions, to keep the temps stable throughout the room. Care is take that no fans point directly at any cages. My room is 9' x 15'.

Similar Threads

  1. Energy efficient reptile keeping?
    By Sputnik in forum Enclosures
    Replies: 39
    Last Post: 02-16-2013, 08:55 AM
  2. Cutting circles in glass
    By guidofatherof5 in forum Husbandry
    Replies: 6
    Last Post: 10-28-2008, 06:03 AM
  3. cutting plastic?
    By drache in forum Enclosures
    Replies: 18
    Last Post: 10-26-2008, 08:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •